The Stinger Attachments STP-34 Compact & Utility Tree Puller attachment is the answer when it comes to pulling trees with a tractor. The Stinger Tree Puller is versatile enough to go on 40-150 hp machines. The STP-34 has a wide range of uses, whether the operator is pulling out honeysuckle and buckthorn or pulling out larger diameter trees. The 34” total opening width allows the operator to place up to a 10” diameter tree towards the back of the jaws, which allows greater capacity, greater clamping force and improved skid loader-to-tree pulling power. Another feature that broadens the STP-34 capabilities is its built-in, heavy-duty 6”x6”- ¾” thick front spade with serrated gussets on the sides.
Note: Lead Times May Vary - Call For Specific Availability
The Stinger Tree Puller Attachment (STP34) is a compact and utility tractor attachment essential. Whether you’re pulling out large trees or clearing natural obstructions, the Tree Puller Attachment will get the job done right. The front spade with serrated gussets only serves to broaden the capabilities of the best Tree Puller you’ll ever need. The Stinger Tree Puller offers great versatility to go on almost any size and type machine, pulling the smallest trees all the way up to larger trees with the higher horsepower machines.
Tractor Tree Puller Features & Specs
We built our tractor tree puller attachment to enable a single person to remove a tree completely. This attachment removes the tree and its roots in one pull for safe and efficient land clearing. Use the attached spade to loosen roots before pulling for the best results. Our tree pullers get the job done using some of the most reliable design features on the market. Its structural steel build, high operating capacity and safety features make the STP-34 an unmatched solution.
Approximate weight 465 lbs.
Constructed with grade 50 steel.
34” total jaw opening width.
42” long jaw length.
¾” thick jaws constructed with Grade 50 steel.
¾” thick jaws are fully welded.
Main pivot pin uses a 1-1/2” cold rolled steel shaft inside a 3/8” thick sidewall bushing.
All pivot points have easily accessible grease zerks.
Main frame constructed with 3”x3” square tubing.
3/8” gussets
Tree Guard fully welded to main frame to ensure operator safety.
6”x6”x3/4” spade on front for multiple uses and also improve the attachment’s versatility.
8”x3/4” flat bar at the end of the jaws that closes tight to pull small-diameter objects.
Conveniently located step on the left-hand side of the attachment for easy skid loader access.
SHIPPING MADE SIMPLE!
At Stinger Attachments, we make delivery as easy as possible so you can focus on doing your job. Leave it to us to deliver our skid loader attachments for sale from Minnesota to your area. We offer competitive, flat-rate shipping costs that you can find on the listing for the product you want. Need more than one attachment? Call us about bundling your attachments for even more savings. If you live near Rose Creek, you can also pick up our skid steer attachments in Minnesota.
Address Type
Zone 1
Zone 2
Zone 3
Zone 4
Commercial Business (Posted Shipping/Receiving Dock)
$175
$250
$325
$375
Farm/Ranch/Home & Residential (No Posted Shipping/Receiving Dock)
$225
$300
$375
$425
PLEASE CALL FOR MULTIPLE ITEMS BEING SHIPPED FOR COMPETITIVE RATES
ALL SHIP TO ADDRESSES MUST BE TRACTOR-TRAILER ACCESSIBLE WITH UNLOADING AVAILABLE
COMMERCIAL ADDRESS MUST HAVE REGULAR BUSINESS HOURS AND NO HOME ON PROPERTY
IMPORTANT TAX INFORMATION
If the product is picked up at our location in Rose Creek, MN sales tax will apply. If you are tax exempt for AG or RESALE, you must fill out proper documentation.
We currently charge sales tax in MN, IA, ME and KS unless tax exempt. When you order online, your cart will reflect the added tax on the product ordered.
If you are exempt for any reason, please message or call us to provide proper documentation.
Stinger Attachments warrants each new product manufactured by us to be free from defects in material and workmanship for a period of Twenty-Four (24) months from date of delivery to the original purchaser. Certain Items may have an extended warranty, such as Cascade forks and Eaton drive motors. Please check each product page for more information.
All returns must be in new condition with all freight costs the responsibility of the buyer. No returns accepted after 10 days of buyer receiving the product.
I recently purchased a Compact Tree Puller (STP 34) from Stinger Attachments. This is the second attachment I have purchased from them. Several years ago I bought a Compact Clam Grapple (CCG 66). My review applies to both attachments. The design of both attachments is excellent, the manufacturing quality is exceptional, and last but not least, the customer service from the time I spoke to them through the delivery was first class. Within two days after I placed the order, the tree puller was on my tractor and in use. In addition, they are made in the USA. Of all of the attachments I have, these are two of the most valuable/useful. I completely recommend Stinger Attachments if you are considering the purchase of either of these implements.
K
K.Peacock
Finally getting to use the grapple after having it all year and getting hydraulic lines run to rear remote. Will be a great help moving small trees, large limbs, boulders and digging out brush and trees.
l
larry westman
Bought a 56” grapple and a stump post puller! Both exceeding my expectations! Both pieces hooked up easy, hydraulics were good. No leaks! Very easy to use, within a few minutes was picking up full loads. It was very easy to work with Brent took time to answer my questions which led me to purchase! Had 18 pine trees blown down by Helene in North Carolina some were 16” to 18” at used both attachments to clean up mess both working flawlessly!
R
Robert Brown
I have one. I bought it because it looked both heavy duty and safer with a mounted guard that comes standard. I had to wait for delivery and as of now still don’t know quality of others. I’ve had heavy equipment in business before retirement and this one in my opinion is actually heavy duty. It is heavy enough that you can tear up your tractor/skid steer if not attentive. I have a John Deere 4052 R which is a 52 hp tractor. I have a John Deere style Quick-Tatch and bought a Chinese skid steer adapter. I immediately destroyed the adapter and had it repaired and beefed up. I tried to buy a JD adapter but had to wait for it to be manufactured. I did not wait. The beefed up adapter works good. I’m sure I have more money in it now than a JD unit but J D needs to get with the sales program. This tree puller is top quality and best of all-American Made. Welds and quality are top notch. You must be careful not to stress your power unit (tractor/skid steer) and break something as it is tougher than they are. I highly recommend one of these if you are in the market. They are unique and everyone that’s sees me using it is amazed at what it can do.
R
Robert Penn
Fantastic! Works awesome. Lots of fun. Takes a little practice. Very dangerous to grab the tree and try to pull with the tractor in reverse! A heavy tree will stay in the ground and lift the back tires of my 2019 New Holland Work Master 70 with a box blade on and fluid in the tires.
Step 1: Push over the tree with the jaws OPEN to protect the piston. Push with the upper safety guard with the jaws pointed down at a 45-degree angle.
Step 2: (Optional) Cut the tree in half with a chainsaw (safe advice I have never done).
Step 3: Back up and grab the trunk. If the tree has a skinny trunk, drop the RPMs down very low to avoid cutting the tree in half.
Step 4: Lift the loader while going forward. The tree will come out.
The ¾” thick steel plates close tight together to form an 8” surface that allows the operator to pull shrubs, buckthorn, honeysuckle and small diameter objects that would slide through the jaws of a normal tree puller. If the operator cannot pull the smaller diameter objects, they can be dug out with the spade. The front spade is also very convenient to pull large diameter trees. It allows the operator to carefully dig around large-diameter trees to break loose roots and free up obstructions. Once the operator has everything broken loose, the tree can be clamped to and pulled out. At Stinger Attachments, building a safe attachment is always our number one goal. That’s why our STP-34 is fitted with a durable 20” tall and 24” wide guard that is fully welded to the main frame to ensure operator safety. The STP-34 has been field tested and used in the most rugged and tough conditions. If you’ve been looking for the answer to pulling trees with a tractor, Stinger Attachments STP-34 is the solution.
Your Tree Pulling Solution
Due to its versatility, our friends in agriculture, land maintenance and private land ownership can all take advantage of the STP-34’s power. In addition to pulling trees and brush, this handy attachment can tug out stumps, overgrown weeds, fence posts and heavy debris.
Have a question about our tractor tree puller for sale or another product? Give us a shout at 507-273-7497 or send us a message online
Needed a land plane asap Ordered it late Tue afternoon. It was custom built, painted and ready for pickup Thur morning. They were awesome accommodating my special requests. No better quality, no better price. Can’t say enough good about these guys. THANK YOU
Jamie
Will Buy From Them Again
I purchased a bale spear (two prong) and asked if they could bring the spears in a couple of inches (about 34” on center) in order to allow me to use this attachment periodically as a pallet fork. Within the first week of having the attachment, I was able to safely and comfortably grab a 1,000 lb flail mower off the back of a truck. This thing is SOLID – expect good things from this for years to come. The actual ship time happened to be much quicker than expected, but the service and advice leading to the purchase and the quality of the implement are really what earned the 5 stars…quick shipping was just a bonus. Will buy from them again.
