If your operation requires frequent tree pulling and removal, no tool comes close to the performance of a Stinger Attachments tree puller. Whether you're removing brush, shrubs or large-diameter trees, this attachment can significantly improve your production time and efficiency over most manual applications. The built-in spade adds another level of versatility to assist you with the most challenging tree-removal tasks.
Note: Lead Times May Vary - Call For Specific Availability
The Skid Steer Tree Puller Attachment (STP34) is a skid steer attachment essential. Whether you’re pulling out large trees or clearing natural obstructions, the Tree Puller Attachment will get the job done right. The front spade with serrated gussets only serves to broaden the capabilities of the best Tree Puller you’ll ever need.
Skid Steer Tree Puller Features & Specs
We built our skid loader tree puller attachment to enable a single person to remove a tree completely. This attachment removes the tree and its roots in one pull for safe and efficient land clearing. Use the attached spade to loosen roots before pulling for the best results. Our tree pullers get the job done using some of the most reliable design features on the market. Its structural steel build, high operating capacity and safety features make the STP-34 an unmatched solution.
Approximate weight 450 lbs.
Constructed with grade 50 steel.
34” total jaw opening width.
42” long jaw length.
¾” thick jaws constructed with Grade 50 steel.
¾” thick jaws are fully welded.
Main pivot pin uses a 1-1/2” cold rolled steel shaft inside a 3/8” thick sidewall bushing.
All pivot points have easily accessible grease zerks.
Main frame constructed with 3”x3” square tubing.
3/8” gussets
Tree Guard fully welded to main frame to ensure operator safety.
6”x6”x3/4” spade on front for multiple uses and also improve the attachment’s versatility.
8”x3/4” flat bar at the end of the jaws that closes tight to pull small-diameter objects.
Conveniently located step on the left-hand side of the attachment for easy skid loader access.
SHIPPING MADE SIMPLE!
At Stinger Attachments, we make delivery as easy as possible so you can focus on doing your job. Leave it to us to deliver our skid loader attachments for sale from Minnesota to your area. We offer competitive, flat-rate shipping costs that you can find on the listing for the product you want. Need more than one attachment? Call us about bundling your attachments for even more savings. If you live near Rose Creek, you can also pick up our skid steer attachments in Minnesota.
Address Type
Zone 1
Zone 2
Zone 3
Zone 4
Commercial Business (Posted Shipping/Receiving Dock)
$175
$250
$325
$375
Farm/Ranch/Home & Residential (No Posted Shipping/Receiving Dock)
$225
$300
$375
$425
PLEASE CALL FOR MULTIPLE ITEMS BEING SHIPPED FOR COMPETITIVE RATES
ALL SHIP TO ADDRESSES MUST BE TRACTOR-TRAILER ACCESSIBLE WITH UNLOADING AVAILABLE
COMMERCIAL ADDRESS MUST HAVE REGULAR BUSINESS HOURS AND NO HOME ON PROPERTY
IMPORTANT TAX INFORMATION
If the product is picked up at our location in Rose Creek, MN sales tax will apply. If you are tax exempt for AG or RESALE, you must fill out proper documentation.
We currently charge sales tax in MN, IA, ME and KS unless tax exempt. When you order online, your cart will reflect the added tax on the product ordered.
If you are exempt for any reason, please message or call us to provide proper documentation.
Stinger Attachments warrants each new product manufactured by us to be free from defects in material and workmanship for a period of Twenty-Four (24) months from date of delivery to the original purchaser. Certain Items may have an extended warranty, such as Cascade forks and Eaton drive motors. Please check each product page for more information.
All returns must be in new condition with all freight costs the responsibility of the buyer. No returns accepted after 10 days of buyer receiving the product.
I recently purchased a Compact Tree Puller (STP 34) from Stinger Attachments. This is the second attachment I have purchased from them. Several years ago I bought a Compact Clam Grapple (CCG 66). My review applies to both attachments. The design of both attachments is excellent, the manufacturing quality is exceptional, and last but not least, the customer service from the time I spoke to them through the delivery was first class. Within two days after I placed the order, the tree puller was on my tractor and in use. In addition, they are made in the USA. Of all of the attachments I have, these are two of the most valuable/useful. I completely recommend Stinger Attachments if you are considering the purchase of either of these implements.
K
K.Peacock
Finally getting to use the grapple after having it all year and getting hydraulic lines run to rear remote. Will be a great help moving small trees, large limbs, boulders and digging out brush and trees.
l
larry westman
Bought a 56” grapple and a stump post puller! Both exceeding my expectations! Both pieces hooked up easy, hydraulics were good. No leaks! Very easy to use, within a few minutes was picking up full loads. It was very easy to work with Brent took time to answer my questions which led me to purchase! Had 18 pine trees blown down by Helene in North Carolina some were 16” to 18” at used both attachments to clean up mess both working flawlessly!
The skid steer tree puller features a 42-inch jaw length with a 34-inch wide opening, allowing the operator to secure up to a 10-inch diameter tree in the back of the jaws. Our tree puller’s large capacity provides increased clamping force and pulling power over most conventional tree pullers. The 8-inch front steel plates close tightly together to secure smaller diameter objects that most similar attachments cannot handle.
The front spade is highly beneficial for digging out areas with obstacles that prevent the operator from accessing the tree directly. Our skid steer attachment is perfect for applications that need a tool for fast and efficient tree removal, like farm projects, orchard picking, large-scale landscaping, forestry work and more. Its versatility also works well for tasks like stump removal, stubborn tree roots, removing heavy debris, grabbing large rocks, pulling out fence posts and eliminating overgrown weeds.
Because safety is among our highest priorities, we fit this attachment with a durable and sturdy 20-inch tall by 24-inch wide tree guard welded to the main frame to enhance operator safety. The stump puller also contains a convenient step on the left side for easy skid steer loader access. The entire attachment design allows you to work safely and effectively with maximum visibility.
We engineer this attachment for maximum productivity with your skid steer loader’s specifications and performance in mind. Our tree puller delivers superior power with the ability to remove a bush or tree’s entire root system, ensuring permanent elimination.
The tree puller’s approximate weight is 450 pounds, and it features Grade 50 steel with premium hardware and other high-quality components. The main pivot pin uses a 1 ½-inch cold-rolled steel shaft inside a 3/8-inch thick sidewall bushing. All the pivot points contain highly accessible grease zerks.
Other key features include:
¾-inch thick, fully welded jaws.
3-inch by 3-inch square tubing on the main frame.
3/8-inch gussets.
A 6-inch by 6-inch by ¾-inch front spade.
8-inch by ¾-inch flat-bar plates connected to the jaws for securing smaller objects.
All our attachments include a universal mounting system for quick installation onto many skid steer models, including machines from manufacturers like John Deere, New Holland, Global and Euro. We also offer a one-year warranty on our attachments, giving you peace of mind when committing to your purchase.
Find Your New Skid Steer Tree Puller at Stinger Attachments Today
At Stinger Attachments, we pride ourselves on superior customer service and technical knowledge. Our expert team can help you determine which skid steer attachment is best suited to improve your operation’s productivity and efficiency. For more information about our skid steer tree pullers or other attachments, connect with us online or call 507-273-7497 today. We ship to the entire lower United States!
Find Your New Skid Steer Tree Puller at Stinger Attachments Today
The Skid Steer Tree Puller Attachment (STP34) is a skid steer attachment essential. Whether you’re pulling out large trees or clearing natural obstructions, the Tree Puller Attachment will get the job done right. The front spade with serrated gussets only serves to broaden the capabilities of the best Tree Puller you’ll ever need.
Needed a land plane asap Ordered it late Tue afternoon. It was custom built, painted and ready for pickup Thur morning. They were awesome accommodating my special requests. No better quality, no better price. Can’t say enough good about these guys. THANK YOU
Jamie
Will Buy From Them Again
I purchased a bale spear (two prong) and asked if they could bring the spears in a couple of inches (about 34” on center) in order to allow me to use this attachment periodically as a pallet fork. Within the first week of having the attachment, I was able to safely and comfortably grab a 1,000 lb flail mower off the back of a truck. This thing is SOLID – expect good things from this for years to come. The actual ship time happened to be much quicker than expected, but the service and advice leading to the purchase and the quality of the implement are really what earned the 5 stars…quick shipping was just a bonus. Will buy from them again.
