Kubota

Kubota is one of the leading producers of heavy machinery, and their products are valuable when it comes to construction, landscaping and many other industries. Kubota skid steers offer versatility onsite with their attachment compatibility. At Stinger Attachments, we offer all the attachment types you need to get your job done.

  • 4 DDS Auger Drive Side View 2 DSS Auger Drive Front View

    Auger Drive

    $2,370.00$3,250.00
    Stingers drilling drives for skid steer loaders are the ultimate in performance, quality and cost effectiveness. The Motor Drives have over 30 years of design and development which have produced the highest quality range of auger drives on the market today. Completely manufactured and assembled using only the highest grade materials and strictest quality control. Fitted with Eaton bell motors and input housing,the innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Stinger drilling drives are backed by industry leading warranty and local factory support. Looking for an auger to go with your auger drive? Click here.
  • Bigfoot Trencher Attachment for a Skid Steer Bigfoot Trencher Attachment for a Skid Steer

    Bigfoot 900 Trencher

    $4,657.00$5,075.00

    Bigfoot 900 Trenchers for Skid Steer, and Euro Global Mount

    Stingers bigfoot 900 trencher features an adjustable depth control foot which ensures the operator trenches at a set depth at all times. Three different chain options are also available for trenching in different ground conditions from general earth, to rocky ground, concrete, asphalt, and even frozen ground.Our trenchers are the most user friendly on the market; allowing the crumber bar to start in the trench and eliminating the need for the operator to get out of the machine to reset the crumber bar (patent pending). Our unique design foot can be seen from the cab to allow the operator to see when the trencher is in the correct trenching position. A complete trenching solution for a cleaner trench helping you increase your efficiency and productivity.
  • Bigfoot Trencher Attachment for a Skid Steer Bigfoot Trencher Attachment for a Skid Steer

    Bigfoot XD Trencher

    $6,355.00$9,305.00

    Bigfoot XD Trenchers for Skid Steer, and Euro Global Mount

    With its innovative features, Stinger Attachments trenchers are the most user friendly on the market. The Bigfoot XD trencher allows the crumber bar to start in the trench, eliminating the need to get out of the machine to reset the crumber bar (patent pending). A uniquely designed foot can be seen from the cab allowing the operator to see when the trencher is in the correct trenching position - No need for a spotter. A large Spoil Auger completes the crumbing system to clear the spoil faster, increasing efficiency and improving productivity.The Bigfoot XD trencher features an adjustable depth control foot which ensures the operator trenches at a set depth at all times. Three different chain options are also available for trenching in different ground conditions from general earth, to rocky ground, concrete, asphalt, and frozen ground.
  • Global Tractor Tree Puller Attachment Global Tractor Tree Puller Attachment
    STP-34 (Stinger tree puller) 34” opening. The Stinger Attachments STP-34 Euro Global tree puller attachment is the answer when it comes to pulling trees with a tractor. The STP-34 has a wide range of uses, whether the operator is pulling out honeysuckle and buckthorn or pulling out larger diameter trees. The 34” total opening width allows the operator to place up to a 10” diameter tree towards the back of the jaws, which allows greater capacity, greater clamping force and improved skid loader-to-tree pulling power. Another feature that broadens the STP-34 capabilities is its built-in, heavy-duty 6”x6”- ¾” thick front spade with serrated gussets on the sides. The ¾” thick steel plates close tight together to form an 8” surface that allows the operator to pull shrubs, buckthorn, honeysuckle and small diameter objects that would slide through the jaws of a normal tree puller. If the operator cannot pull the smaller diameter objects, they can be dug out with the spade. The front spade is also very convenient to pull large diameter trees. It allows the operator to carefully dig around large-diameter trees to break loose roots and free up obstructions. Once the operator has everything broken loose, the tree can be clamped to and pulled out. At Stinger Attachments, building a safe attachment is always our number one goal. That’s why our STP-34 is fitted with a durable 20” tall and 24” wide guard that is fully welded to the main frame to ensure operator safety. The STP-34 has been field tested and used in the most rugged and tough conditions. If you’ve been looking for the answer to pulling trees with a tractor, Stinger Attachments STP-34 is the solution. Due to its versatility, our friends in agriculture, land maintenance and private land ownership can all take advantage of the STP-34’s power. In addition to pulling trees and brush, this handy attachment can tug out stumps, overgrown weeds, fence posts and heavy debris. Got a question about our tractor tree puller for sale or another product? Give us a shout at 507-273-7497 or send us a message online
    Add to cart Details
  • Skid Steer Land Plane Attachment Skid Steer Land Plane Attachment

    Land Plane

    $1,610.00$2,687.00
    The Stinger Attachments skid steer land plane leveler is the perfect piece of equipment for landscapers, construction workers, and farmers. Common jobs for the attachment would be top soil prep, rough driveway, trail grooming, construction sites and much more. Our land plane for sale is designed for skid steer loaders and comes standard with a heavy-duty design. It includes a 3/4×6 cutting edge front and back and two heavy-duty 3.5×3.5 3/8” angle irons for leveling material. The product is also available with a bolt-on cutting edge and an optional hydraulic scarifier for tilling. At Stinger Attachments, we go the extra mile to make sure that you have the best experience possible with your land plane. Built in America using structural-grade steel, our skid steer land plane attachments hold up to the toughest leveling jobs. We offer a one-year warranty on these products so you can feel the confidence in our attachments that we do. Consider us a call or online message away when you need help finding the right Stinger product. Get in touch with our experts by calling 507-273-7497 or completing our contact form.
  • Mini Bigfoot Trencher

    $3,930.00$4,350.00

    Mini Bigfoot for Mini Skid Steer Hookup, ASV, Terex, Bobcat MT series

    Stinger Attachments “Mini Bigfoot” Trencher fits best to mini loaders, and walk behind machines. Includes Mount cost to Mini Skid, ASV, Terex, PT30, RC30, Bobcat MT series. Must Specify machine after order is placed. Trench widths available in 4,6,8” and 36” deep. Our mini bigfoot trencher features an adjustable depth control foot which ensures the operator trenches at a set depth at all times. Three different chain options are also available for trenching in different ground conditions from general earth, to rocky ground, concrete, asphalt, and even frozen ground. Our trenchers are the most user friendly on the market; allowing the crumber bar to start in the trench and eliminating the need for the operator to get out of the machine to reset the crumber bar (patent pending). Our unique design foot can be seen from the cab to allow the operator to see when the trencher is in the correct trenching position. A complete trenching solution for a cleaner trench helping you increase your efficiency and productivity.
  • Skid Steer Pallet Fork Attachment Skid Steer Pallet Fork Attachment

    Pallet Forks Attachment

    $1,080.00$1,320.00
    The Stinger Attachments pallet forks are designed for heavy-duty use. We use industry-leading USA forks by Cascade Corp. They are backed by a 3-year warranty. Our frame design features a heavy-duty machined 1.25” x 3” top carrier bar — this top bar is then welded to a 3” x 2” structural tube to make the top support even stronger. The bottom carrier is a ½” x 3” flat welded to a 3” x 3” support tube. Our main carriage uprights are constructed of 3/8” grade 50 steel. Our skid steer loader pallet forks are manufactured in a jig fixture by man to ensure high tolerances. Our high tolerances are important because this allows the fork to slide easily. At Stinger, we build our skid steer loader pallet fork attachments for sale with the operator in mind. Stinger Attachments' standard wide-open walk-thru design makes passage easy for the operator. We also added a safety step for extra protection during solo operation. Our pallet fork design also focuses on easier movement and adjustment for seamless lifting. Many of our friends across different areas of expertise can find a use for a pallet fork in their work. Farmers and ranchers on any scale can use a pallet fork to move hay, haul fencing or clear brush. In construction, operators count on pallet forks to move materials horizontally and vertically. Some pallet fork users come up with creative uses like carrying a deer after a successful hunt or installing a structure. All Stinger Attachments products come standard with the universal skid steer loader quick-attach plate. All of our attachments can be modified to fit your tractor with common mounts such as Global, Euro or Westendorf — just to name a few. Other common machines we are compatible with are John Deere, Kubota and Mahindra. Please contact our sales team with any questions or customization requests.
  • Skid Steer Grapple Bucket Skid Steer Grapple Bucket
    The RTG-XD Series skid steer grapple bucket is an extreme duty piece of equipment for some of the biggest machines on the market today. The XD model takes our popular selling Heavy duty RTG models to the next level. These are specifically engineered for forestry, land clearing, and demolition. It has a 6” opening between the tines. Also unique to this design is a serrated cutting tine for grubbing. Let's Talk Strength! Our Standard heavy duty models feature ⅜ Grade 50 tines and grapple sides. The XD Models bump up to a ½ Grade 50 tine and grapple sides. These are simply built for the commercial end user running high end 100hp plus track and small payloader machines.
  • Material Bucket Attachment by Stinger Attachments Material Bucket Attachment by Stinger Attachments
    The Series 3 Skid Steer Material bucket attachment is a step up in capacity from our series 2. Series 3 is engineered to provide more capacity for larger skid steer wheeled and track machines. Available in 5 different sizes from 60 to 84” inches in width. This material bucket attachment comes standard with a universal skid steer mount plate. We can also custom fit other mounting options or leave plain so you have the option to custom fit your own. Our top channel brace and bottom radius support add the strength needed to handle the biggest machines. The bottom-radius support also adds better clean out. Our standard back degree angle is 68 degrees. We have found this to be a very good fit for most machines in the roll-back and dump positions. The bucket is available with two cutting edge options. Option 1 (Weld on Edge), we weld on a large 3/4x8 Edge to the bucket shell. Option 2 (Bolt on Edge), we weld a 1/2x6" edge with holes to bucket shell, then bolt on a 3/4x6 edge to the bottom.
  • Material Bucket Series 4 2 Material Bucket Series 4 1
    The Stinger Attachments Series 4 material bucket is a step up from our series 3 in capacity. The Series 4 comes standard with a ¼” Grade 50 Shell. These buckets are engineered to hold up to the largest machines on the market day after day. Available in 5 different sizes from 60 to 84" inches in width. This material bucket attachment comes standard with a universal skid steer mount plate. We can also custom fit other mounting options or leave plain so you have the option to custom fit your own. Our top channel brace and bottom radius support add the strength needed to handle the biggest machines. The bottom-radius support also adds better clean out. Our standard back degree angle is 68 degrees. We have found this to be a very good fit for most machines in the roll-back and dump positions. The bucket is available with two cutting edge options. Option 1 (Weld on Edge), we weld on a large 3/4x8 Edge to the bucket shell. Option 2 (Bolt on Edge), we weld a 1/2x6" edge with holes to bucket shell, then bolt on a 3/4x6 edge to the bottom.
  • Skid Steer Grapple Bucket Attachment Skid Steer Grapple Bucket Attachment
    The RRG-XD Series skid steer grapple bucket is an extreme-duty piece of equipment for some of the biggest machines on the market today. This model takes the standard RRG bucket that is mainly constructed of 3/8″ material to 1/2″ steel. We upgraded the grapples and cutting edge as well. The open-end and wide-space design allows operators to be very versatile on different job sites, whether construction, farm or forestry-related. While the standard RRG root rock grapple suits smaller jobs, this extreme-duty beast tackles the toughest skid steer work. It fits larger equipment models and handles industrial-grade projects in construction, agriculture, landscaping and more rugged specialties. Clear heavy debris, haul large material loads and prep rough terrain with ease. If you have a question about our large root rock grapple, don't hesitate to reach out. Get in touch with us at any time by calling 507-273-7497 or contacting our experts online.
  • Material Bucket Skid Steer Attachment Series 1 Material Bucket Skid Steer Attachment Series 1
    The Series 1 skid steer material bucket attachment features our standard height and depth. Available in 5 different sizes from 60 to 84” inches in width, these material buckets can handle anything from light material to heavy material. This bucket is a great fit for compact tractors and small- to medium-frame skid-steer machines. It comes standard with a universal skid steer mount plate. We can also custom-fit other mounting options or leave plain so you have the option to custom-fit your own. Our top support brace is designed to allow visibility of the cutting edge from the cab. Keep in mind that it may not be visible from all machines based on cab/seat placement. All Series 1 buckets include an added bottom radius support for superior strength and better clean-out to handle even the heaviest material. Our standard back degree angle is 68 degrees. We have found this to be a very good fit for most machines in the roll-back and dump positions. The bucket is available with two cutting edge options. With Option 1 (weld-on edge), we weld on a large 3/4×8 edge to the bucket shell. When you order Option 2 (bolt-on edge), we weld a 1/2×6″ edge with holes to bucket shell, then bolt on a 3/4×6 edge to the bottom. Out of our five series of material buckets, you can call the Series 1 our jack-of-all-trades. It has the most affordable price and standard design to handle most light- to medium-duty jobs. With a Series 1 bucket, you can haul light to heavy material for your property or business. Our friends in agriculture, ranching, hobby farms, construction, and many other areas of expertise can enjoy what this attachment offers. For answers to your questions about our skid steer loader material bucket attachments, get in touch with our experts. Feel free to call us at 507-273-7497 or send us a message at any time. Allow 3-7 business days to build attachment if not in stock. Please call for more information.
  • Material Bucket Skid Steer Attachment Series 2 Material Bucket Skid Steer Attachment Series 2
    The Series 2 skid steer material bucket attachment by Stinger Attachments features our standard height with a deep bottom. Series 2 is engineered to provide maximum capacity with a standard back. The bucket's deep bottom allows for excellent visibility during grading. Available in 5 different sizes from 60 to 84” inches in width. This bucket is a great fit for compact tractors and medium- to large-frame skid-steer machines. This material bucket attachment comes standard with a universal skid steer mount plate. We can also custom-fit other mounting options or leave plain so you have the option to custom-fit your own. Our top channel brace and bottom radius support add the strength needed to handle the biggest machines. The bottom radius support also adds better clean out. Our standard back degree angle is 68 degrees. We have found this to be a very good fit for most machines in the roll-back and dump positions. The bucket is available with two cutting edge options. With Option 1 (weld-on edge), we weld on a large 3/4×8 edge to the bucket shell. When we build Option 2 (bolt-on edge), we weld a 1/2×6″ edge with holes to bucket shell, then bolt on a 3/4×6 edge to the bottom. If you need a well-rounded material bucket with a larger capacity than typical, consider the Series 2 large capacity skid loader bucket. The Series 2 bucket takes the standard design of the Series 1 and deepens the bottom. As a result, you can use this attachment to carry heavier loads on a variety of skid steer models. Since the Series 2 can haul many types of loose material, it makes a great choice for our friends in agriculture, construction and other specialties that demand rugged equipment. Do you need help finding the right skid steer loader large capacity bucket for your job? Give us a shout at any time by calling 507-273-7497 or sending an online message. Allow 3-7 business days to build attachment if not in stock. Please call for more information.
  • Skid Loader Rock Bucket Which to Buy Skid Steer Rock Bucket Attachment

    Skid Steer Rock Bucket | RK-Series

    $1,440.00$1,764.00
    Our skid steer rock buckets will reduce your workload and save you time spent on a project. We offer 7 different size buckets, ranging from 60″ to 88″. With this heavy-duty skid steer rock bucket, you can easily pick up material, sift unwanted material, and haul it over to the new job site. Our rock buckets come with large 4×4 upper square tubing, and heavy-duty 3/8 plate steel throughout the entire bucket truly adds to the life and economic viability of this product. Each of our rock buckets is equipped with an innovative contour tine design which allows large amounts of rock and debris to stay held in place while work is done, thus saving extra time and trips to the dump. Heavy-duty tines are spaced 3.25″ apart so larger items will stay in the bucket while loose dirt or dust falls through.
  • Skid Steer Rock Grapple Attachment Skid Steer Rock Grapple Attachment
    The skid steer rock grapple RG-Series attachment is an excellent choice for farmers in the field picking rock. Our unique contour tine design helps hold rock in the bucket while picking more. It also secures material while sifting. It has a 2-7/8” opening between the tines to grab the smaller rocks but still let the dirt fall through. It is fitted with a weld-on serrated cutting edge ½” thick. The serrated cutting edge allows for easy digging of rocks and also helps leave a very nice finish with doing grading. It is fitted with 2 grapples that operate independently to secure uneven loads. With a large 48” grapple opening, the bucket can hold large amounts of material to ensure productivity. We build this attachment with strong grade 50 steel all throughout to ensure a high quality product you can depend on. Grapples have large 1” greasable pins as well. This attachment comes with hydraulic hoses and standard ½” flat face couplers. If you have any questions about our skid steer loader rock grapples for sale, give us a shout. Get in touch by calling 507-273-7497 or sending us a message.

Kubota Skid Steer Attachments for Any Model

Kubota skid steers offer durability and power, making them an ideal choice for any fleet. One of the benefits of skid steers is their range of attachment functions. They offer several equipment types in one machine.

At Stinger Attachments, we carry all the work tools you need for your Kubota skid steer. All of our attachments are compatible with Kubota skid steers, whether you own the:

  • SSV65
  • SSV75
  • SVL75
  • SVL75-2
  • SVL90-2
  • SVL-95-2

If you don’t see your model listed here, feel free to reach out! There’s a good chance that our attachments will work with it.

Meet Your Needs With Our Attachment Selection

To get the most from your Kubota skid steer, you need a wide variety of attachments that meet your applications. Stinger Attachments carries work tools for small and large machine models and material types to give you the best performance for the job at hand. Explore some of our tool categories and how they can enhance your Kubota skid steer.

Auger Drives and Trenchers

In agriculture, landscaping and construction, digging trenches and holes is valuable to operations. Our drives and trenchers support these practices with durable construction and a range of sizes. Use our auger drives for drilling holes for fencing or posts. Our augers with a 2″ hex are a popular attachment for larger drilling areas.

Buckets

Attaching a bucket to your skid steer can help you lift and move various materials, including dirt, gravel, sand, snow and rocks. Our line of manure buckets and rock buckets provide special adaptations, like tines and grapples, to improve material handling.

When you use one of our standard material buckets, you can choose from a selection of sizes and capacities to meet your application. Our Series 3 bucket is a popular product for its function with large skid steers and high volumes.

Grapples

For extra support in material handling applications, grapples are an excellent choice. These attachments pair our buckets’ loading capacities with a robust grabbing mechanism for stable transport. With a range of configurations, like the RTG-XD model for larger skid steers, you can efficiently finish any job.

Our rock grapple selection uses tined buckets to help operators sift out unwanted materials. We offer a range of designs for this attachment, including an open-sided model that provides space and flexibility for logs and long rocks.

Pallet Forks

Pallet forks make an excellent addition to any skid steer for their versatility. While they’re typical in warehouse environments, they also support construction, landscaping and agriculture. You can use our pallet fork attachments to move large items like hay bales and two-by-fours.

Choose Stinger Attachments for Kubota Skid Steers

Explore our full stock of attachments and find what you need for a productive fleet. Stinger Attachments offers durable materials and reliable construction to give you a tool that will last. If you have any questions, get in touch with our team today.

Go to Top